Thursday, August 5, 2010

The Deck: Part 1

I have been so scared of refinishing the deck. It needed it when we bought the house but we ignored it until this spring when we knew it could wait no longer. While choosing a stain, I found that most stains are only good for 1-2 years. Since we have owned the home two years, the current stain is way past it’s prime – and shows it. So far, all my worst fears have come true. I take that back. My worst fears involve the sanding/paint stripping and we have not even gotten to that point yet!

Monday we started with tightening screws that have worked loose and are not flush with the boards. We quickly discovered that rusty screws tend to break off (leaving the majority of the screw in the wood) when torque is applied. And pretty much every screw was not seated correctly to begin with.

Our first trip to the store was to purchase screws we did not know we would need and items we had known about: a replacement board, sandpaper, stain, etc. When we got home we found the screws were not long enough and the sandpaper was the wrong kind to fit the sander we borrowed. Back Matt went.

Tuesday was spent replacing screws and replacing a split board.

Wednesday started with a trip to the hardware store to get some more screws. We finished up the screwing and after waiting out some rain, finished the evening with scrubbing on some wood cleaner to get rid of the mold and mildew that had formed under the built-in, wrap-around bench. After another trip to the store to purchase a new hose. The very end of one of our hoses got ran over and squished so it cannot connect to another hose or have a pressure sprayer attached. And the one left was not long enough to reach.

No comments: