Thursday, August 12, 2010

The Deck: Finished

   We decided to go ahead with the second coat and hope everything evens out without sanding. A friend made us aware that he owns a paint sprayer and brought it over this morning to spray the second coat for us. I was so excited. Using a roller for the first coat on the deck floor did not allow the stain in between the slats and it showed more obviously than I would have liked. So using a sprayer would get stain in these impossible spots and would finish a project in 1 hour that would take us 6 hours by hand.

When trying to choose a stain, there is transparent stain, semi-transparent, semi-solid, and solid. I did not want my deck to look painted. If I had chosen a solid stain, it would have had the solid appearance of a paint but would not have needed quite such an intensive prep. We did all the sanding and extra work to be able to stain the deck with a semi-transparent stain that would still look natural and show the grain of the wood.

Using the paint sprayer, the stain went on evenly but much too thick. Where the stain was applied slightly thinner, the stain beaded and dried with the beading pattern apparent. He sprayed the deck floor and the back of the bench, then I finished the front of the bench this evening with a paint brush.  The bench looks beautifully stained while the floor looks painted.

The important thing is that our project is finished and the wood is protected from the elements and the whole thing looks better than it did before and I will be just about the only one that even notices the differences.

Whew!

PICT3193

1 comment:

Shem said...

I need a pic of the finished project!